1.请您下载一个3cdaemon的FTP的软件，其设置如下：
2.设置完成后，请您参考如下方法升级：
如果您设置您的ftp服务器（电脑的地址）的地址设置为192.168.0.1，请将您的ap的地址设置为同网段的，用网线将ap和电脑互联，设置方法如下：
WA2610-AGN delete/uwa2600a_fit.bin //删除后一定不要断电
WA2610-AGN sys
[WA2610-AGN]int vlan 1
ip add 192.168.0.2 24
quit
[WA2610-AGN]quit
WA2610-AGN ftp 192.168.0.1 //登陆ftp
Trying 192.168.0.1 …
Press CTRL+K to abort
Connected to 10.153.47.37.
220 3Com 3CDaemon FTP Server Version 2.0
User(10.153.47.37none)):123456
331 User name ok, need password
Password:
230 User logged in
[ftp]get wa2600a_fat.bin //此处为您上传的文件名
//等待上传完成
[ftp]bye
WA2610-AGN boot-loader file wa2600a_fat.bin //此处请修改为您上传的文件名
This command will set boot file, Continue? [Y/N]:yThe specified file will be used as the bootat the next reboot on slot 1!
WA2610-AGN dis boot-loader
The current boot app is: flash:/wa2600a_fat.bin
The app that will boot upon reboot is: flash:/wa2600a_fat.bin
WA2610-AGN
WA2610-AGN
WA2610-AGN dir
Directory of flash:/
0 -rw- 3492348Aug 08 2008 20:00:00 wa2600a_fit.bin
1 -rw- 7591916Apr 26 2000 15:37:12 wa2600a_fat.bin
13081 KB total (2254 KB free)
WA2610-AGN
WA2610-AGN
WA2610-AGN ap-mode fat
Change working mode will reboot system, do you want to continue? [Y/N]:y
Change working mode to FAT now? [Y/N]:y……………………………………………..
%Jul 31 00:11:24:901 2010 WA2610-AGN IFNET/4/LINK UPDOWN:
GigabitEthernet1/0/1: link status is DOWN
%Jul 31 00:11:24:904 2010 WA2610-AGN IFNET/4/LINK UPDOWN:
Vlan-interface1: link status is DOWN
%Jul 31 00:11:24:904 2010 WA2610-AGN IFNET/4/UPDOWN:
Line protocol on the interface Vlan-interface1 is DOWN
System is starting…
Booting Normal Extend BootWare..
The Extend BootWare is self-decompressing………………….Done!
无线基本配置连接：
ap登陆地址为192.168.0.50
登陆用户名和密码adminh3capadmin
http://www.h3c.com.cn/Service/Document_Center/Wlan/WA/WA1208E/Configure/User_Manual/WA_Web_UM-6W103/201009/690345_30005_0.htm
请您参照快速配置向导案例